UV/ozone treated (UVO-treated) TaS2 and non-treated TaS2 nanosheets are introduced into organic photovoltaic cells (OPVs) as hole extraction layers (HEL) and electron extraction layers (EEL). TaS2 nanosheets are obtained via ultrasonic vibration and size-controlled by centrifugation. Atomic force microscopy (AFM) images reveal that the thickness and lateral size of TaS2 nanosheets are approximately 1 and 70 nm, indicating that uniform and ultrathin TaS2 nanosheets are obtained. The work function of TaS2 increases from 4.4 eV to 4.9–5.1 eV after applying UVO treatment by forming Ta2O5. In addition, the power conversion efficiencies of normal OPV with UVO-treated TaS2 and inverted OPV with TaS2 are 3.06 and 2.73%, which are higher than those of OPV without TaS2 (1.56% for normal OPV and 0.22% for inverted OPV). These results indicate that TaS2 is a promising material for HEL and EEL layers in …
WS2 nanosheets obtained through a simple sonication exfoliation method are employed as a hole‐extraction layer to improve the efficiency of organic photovoltaic cells (OPVs). A reduction in the wavenumber difference in the Raman spectra, the appearance of a UV absorption peak, and atomic force microscopy images indicate that WS2 nanosheets are formed through the sonication method. The power conversion efficiency (PCE) values of OPVs with and without untreated WS2 layers are both 1.84%. After performing a UV‐ozone (UVO) treatment on the WS2 surface for 15 min, the PCE increases to 2.4%. Synchrotron radiation photoelectron spectroscopy data show that the work function of WS2 increases from 4.9 eV to 5.1 eV upon UVO treat‐ ment, suggesting that the increase in the PCE value is caused by the band alignment. Upon inserting poly(3,4‐ethylenedioxythiophene):poly(styrene‐sulfonate) (PEDOT …
Graphene oxide (GO) and silane-functionalized GO (sGO) sheets obtained through a simple sonication exfoliation method are employed as hole transport layers to improve the efficiency of organic photovoltaic (OPV) cells and organic light-emitting diodes (OLED). GO was functionalized using (3-glycidyl oxypropyl)trimethoxysilane (GPTMS) and triethoxymethylsilane (MTES). The appearance of new peaks in the Fourier-transform infrared spectra of the sGOs indicates the formation of Si–O–C, Si–O–Si, Si–H, and Si–O–C moieties, which provide evidence of the addition of silane to the GO surface. Furthermore, the appearance of Si–O–Si bonds in the synchrotron radiation photoelectron spectra (SRPES) of the MTES-sGO and GPTMS-sGO samples suggests that silane groups were effectively functionalized onto the GO sheets. An OPV cell with GO layers showed a lower performance with a power conversion …
Mosquitoes are the deadliest animals on earth and are the vectors of several neglected tropical diseases. Recently, essential oils have emerged as potential renewable, cost-effective, and environmentally benign alternatives to synthetic pesticides for control of mosquitoes. In this work, thirteen species of Piper were collected from different areas of central Vietnam. The essential oils were obtained by hydrodistillation and analyzed by gas chromatography–mass spectrometry. The essential oils were screened for mosquito larvicidal activity against Aedes aegypti. Four of the Piper essential oils showed outstanding larvicidal activity against Ae. aegypti, namely P. caninum, P. longum, P. montium, and P. mutabile, with LC 50 and LC 90 values less than 10 µg/mL. Multivariate analysis has correlated concentrations of β-caryophyllene, β-bisabolene, α-pinene, and β-pinene with mosquito larvicidal activity. View Full-Text
It was demonstrated that organolead halide perovskites (OHPs) show a resistive switching behavior with an ultralow electric field of a few kilovolts per centimeter. However, a slow switching time and relatively short endurance remain major obstacles for the realization of the next-generation memory. Here, we report a performance-enhanced OHP resistive switching device. To fabricate topologically and electronically improved OHP thin films, we added hydroiodic acid solution (for an additive) in the precursor solution of the OHP. With drastically improved morphology such as small grain size, low peak-to-valley depth, and precise thickness, the OHP thin films showed an excellent performance as insulating layers in Ag/CH3NH3PbI3/Pt cells, with an endurance of over 103 cycles, a high on/off ratio of 106, and an operation speed of 640 μs and without electroforming. We suggest plausible resistive switching and …
Here, this study successfully fabricates few‐layer MoS2 nanosheets from (NH4)2MoS4 and applies them as the hole transport layer as well as the template for highly polarized organic light‐emitting diodes (OLEDs). The obtained material consists of polycrystalline MoS2 nanosheets with thicknesses of 2 nm. The MoS2 nanosheets are patterned by rubbing/ion‐beam treatment. The Raman spectra shows that {poly(9,9‐dioctylfluorene‐alt‐benzothiadiazole), poly[(9,9‐di‐n‐octylfluorenyl‐2,7‐diyl)‐alt‐(benzo[2,1,3]thiadiazol‐4,8‐diyl)]} (F8BT) on patterned MoS2 exhibits distinctive polarization behavior. It is discovered that patterned MoS2 not only improves the device efficiency but also changes the polarization behavior of the devices owing to the alignment of F8BT. This work demonstrates a highly efficient polarized OLED with a polarization ratio of 62.5:1 in the emission spectrum (166.7:1 at the peak intensity of 540 …
A facile, highly efficient approach to obtain molybdenum trioxide (MoO 3)-doped tungsten trioxide (WO 3) is reported. An annealing process was used to transform ammonium tetrathiotungstate [(NH 4) 2 WS 4] to WO 3 in the presence of oxygen. Ammonium tetrathiomolybdate [(NH 4) 2 MoS 4] was used as a dopant to improve the film for use in an electrochromic (EC) cell.(NH 4) 2 MoS 4 at different concentrations (10, 20, 30, and 40 mM) was added to the (NH 4) 2 WS 4 precursor by sonication and the samples were annealed at 500 C in air. Raman, X-ray diffraction, and X-ray photoelectron spectroscopy measurements confirmed that the (NH 4) 2 WS 4 precursor decomposed to WO 3 and the (NH 4) 2 MoS 4–(NH 4) 2 WS 4 precursor was transformed to MoO 3-doped WO 3 after annealing at 500 C. It is shown that the MoO 3-doped WO 3 film is more uniform and porous than pure WO 3, confirming the doping quality …